Since I was formatting my PC I noticed, when downloading network drivers, that the BIOS for my motherboard (ASUS P8H67-M) was changed significantly since last I updated it. So I went ahead and downloaded the latest BIOS for this motherboard, and proceeded to install the BIOS during one of the many system restarts needed when setting up a system from scratch. The update was going well - the update utility recognized the BIOS file and accepted it. At the end, a message that a reboot is required appeared with an OK button.
And here's where things went sour. Pressing enter, the system would proceed to beep wildly with short beeps until I eventually turned the system off (long press of the power button). Now the system is quiet - the fans would spin, but it's as if the CPU was missing. I tried to clear the CMOS, both using regular means as well as popping out the battery and disconnecting all power.
I even detached the memory sticks to see if the system would complain about that (it should beep in a specific fashion when no memory is in the system). Alas - nothing.
No beeps, no video signal - only the silent hum of the CPU and PU fans. I'm a bit baffled by the experience - how is this possible? Did I flash the wrong BIOS? If so, don't these systems check if the model is OK and prevent flashing the wrong thing? I'm having things strange feeling where I feel I did something wrong but at the same time feel I did everything right. Also, what can I do now? Unfortunately the CrashFree utility (mentioned by Brian) turned out to be a big bust and was pretty much useless.
The whole motherboard was basically bricked. I had to send it for repair. When I got it back, the note said that 'no repairs were needed, only a new BIOS had to be installed' - I'm guessing the service team has a way to hook up the motherboard to flash a new BIOS directly - possibly via the little removable chip. Anyway, I also think I know what the reason for this was.
As Keltari mentioned in one of the comments in the other answer, doing small increment upgrades on a 'sister PC' (with the same motherboard) worked fine. What wasn't apparent before was that one of the BIOS updates was pretty large and required a dual-flashing procedure. My guess is that when I originally installed the latest BIOS on a very old BIOS, skipping this step, I bricked the whole motherboard. So there - I'm posting this answer as it contains the most likely reason and the only repair procedure I could use. With high hopes I did as you suggested. I've downloaded the old BIOS that I remember working before this little disaster and placed it on a freshly FAT32 formatter flash drive, renaming it according to the instructions ( P8H67-M.ROM). However, the system is completely silent when I turn it on, except for the turning of the fans.
The screen is blank, and even the light on the flash drive doesn't blink (which would indicate it's in use). Best overall college sports programs. It's a larger drive than the one you mentioned, but FAT32 formatted anyway. I have a feeling the failed update may have screwed up the BIOS completely.:( – Aug 16 '13 at 14:29.
I have a Asus CM6650 Computer with a Asus P8H67-M Pro motherboard and I am trying to boot clover to install Sierra. However, once I try to boot Clover from a USB, I see black screen with a cursor.
I used Unibeast to create the Sierra USB for both Legacy and UEFI to install the clover bootloader. I've tried booting in Legacy mode and that works, but this computer supports BIOS and UEFI and I am at a loss to understand why it cannot boot clover from the USB. I've tried to Google the solution with suggestions to have a custom BIOS, but all the links are dead.
Motherboard Specifications Any help would be appreciated.
How To Make Bootable Usb Bios Update
HOW TO UPDATE BIOS FROM USB - Pls watch the video in HD fullscreen to read stuffs clearly although I have tried to make it possible to read in small screen. LINKS:- 1)HP USB Formatt Tool- 2)Bootme folder- the required dos file- Use 7zip or winrar to extract the downloaded bootme.7z. 2)Link to ECS website where you can see instructions for different BIOS updating,its just for refrence.
IMPORTANT:-Even though BIOS update does not require you to be intellectually genius person but before begning first keep these things in mind:- 1.Do you realy need to update your bios? Unless the the updated bios file supports a solution to the problem that you might be having with your motherboard and that new update has a solution then only do bios update, do not do it if you don't need to and if every thing works fine with your current bios. Make sure to read what support is added in the bios update that u are going to use on your motherboards manufacturers website. 2.If the update fails your motherboard might endup being useless - If by mistake your bios update fails for any reason your mobo might crash,that is problem with most of the older motherboards but nowadays new motherboards are made with a crashfree bios so new mobo might have option of recovery so pls try to get more details about your motherboard and its bios before trying out any thing.and if any things fails you are responsible NOT ME. In this vid I have shown option to boot pc from a USB device which has the necessary files and update it in DOS format.
Steps are simple- 1-First make your USB device bootable with dos files in it which make usb device bootable. 2-Put your flashutility and BIOS file in the USB device. 3-Boot from USB device by setting first boot device to USB device in BIOS setup or using advanced boot menu by pressing F8,F11,ESC keys depending on what key it is for your motherboard,type proper commands,and follow the on screen procedures. In this vid I have shown the update for my mobo ECS P4M800-M7 V1.0 so pls make sure you get details about your own motherboard and its procedure to update bios the procedure is usually similar but commands and instruction after booting from USB device Might be different so pls get proper info on that. There might be a windows based flashutility also available for your mobo so pls look for it might be simple but if you don't have then you can see the procedure in this video. This vid is mostly usefull for updating bios of older motherboards which require you to make a bootable Floppy but nowadays no one even have have a floppy drive in their pc and floppy disk have became like stuff from history.
Fanless Design: stylish heatsink solution The stylish heatsink features 0-dB thermal solution that offers users a noiseless PC environment. Not only the beautiful shape upgrades the visual enjoyment for motherboard users, but also the heatsink design lowers the temperature of the chipset and power phase area through high efficient heat-exchange. Combined with usability and aesthetics, the ASUS stylish heatsink will give users an extremely silent and cooling experience with the elegant appearance!
Anti-Surge Protection This special design prevents expensive devices and the motherboard from damage caused by power surges from switching power supply (PSU). S/PDIF out connector at the back I/O This motherboard provides convenient connectivity to external home theater audio systems via the optical S/PDIF (SONY-PHILIPS Digital Interface) out connecor at the back I/O.
The S/PDIF transfers digital audio without converting it to analog format and keeps the best signal quality. UEFI BIOS (EZ Mode) Flexible & Easy BIOS Interface The new ASUS UEFI BIOS is an Unified Extensible Firmware Interface that offers a user-friendly interface that goes beyond traditional keyboard-only BIOS controls to enable more flexible and convenient mouse input. Users can easily navigate the new UEFI BIOS with the same smoothness as their operating system. It natively supports hard drives larger than 2.2TB in 64-bit, with full storage space utilization, helping deliver far more exciting computing than traditional BIOS versions.
The exclusive EZ Mode displays frequently-accessed setup info, while the Advanced Mode is for experienced performance enthusiasts that demand far more intricate system settings. Products certified by the Federal Communications Commission and Industry Canada will be distributed in the United States and Canada. Please visit the ASUS USA and ASUS Canada websites for information about locally available products. All specifications are subject to change without notice.
Please check with your supplier for exact offers. Products may not be available in all markets. Specifications and features vary by model, and all images are illustrative. Please refer specification pages for full details. PCB color and bundled software versions are subject to change without notice. Brand and product names mentioned are trademarks of their respective companies.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |